Contact
Professional Licenses
Expertise
Services
Location
About Alexis SCHLESSINGERMAN
Alexis Schlessingerman is a multi-state licensed Professional Engineer and Certified Construction Manager with over 18 years of experience as a Director, Project Manager, Design Manager, Special Inspector Director, Mechanical Engineer, Construction Manager, and Project Controls Manager. At heart, he is an Engineer with many years of hands-on experience in construction, engineering, and program management of large civil mechanical, heating, structural, and utility upgrade projects.
Mr. Schlessingerman has been involved with Mechanical Design Projects including NYCHA Taft Houses Boiler Upgrade, Polo Grounds Underground Steam Lines, Pomonok Gas Risers, NYCDEP Boiler Energy Assessment Study, Wards Island Settling System Upgrades, Port Richmond Boiler Upgrade Project, Wollman Rink, and the NYCHA Sandy Improvements Project.
Currently, Mr. Schlessingerman is a Director of Special Inspections for SOCOTEC, managing special inspection services for large projects such as NYCHA Boiler Program, Hudson Yards, Penn Plaza, NYCDEP Projects, various new major buildings, major rehabilitation, and other large projects.
Professional Experience
6+ YEARS WITH FIRM | 18+ YEARS IN INDUSTRY
Alexis Schlessingerman has been serving as a Director at DnA Controlled Inspections since 2018, a role he has continued following the company's acquisition by SOCOTEC in 2023. Before joining DnA, Alexis worked as an Associate at D&B Engineers and Architects and as a Project Manager for the New York City Department of Environmental Protection.
Qualifications
- Bachelor of Science in Mechanical Engineering – NYU Polytechnic – 2007
- Special Inspections
- Construction Engineering
- Mechanical Engineering Forensics
- Professional Witness and Testimony
- Claims Evaluation & Preparation
- Construction Defects
- Certified Construction Manager (CCM)
- Concrete Panels
- Construction Engineering & Science
- Demolition
- Green Roof
- Metal Panel
- Pavement
- Precast
- Stucco
- Unitized / Pre-Fabricated Building Assemblies
- Materials and Vapor Barrier Selection
- Fabrication & Installation
- Heat Exchanger Problems
- Large Expansion Projects
- Maintenance
- Mechanical Engineering
- Operability
- Piping
- Piping and Component Stress
- Piping Ruptures
- Plant Operations
- Pressure Vessel
- Crane Accident & Collapse Analysis
- Degradation
- Dynamic Loading
- Dynamics
- Feasibility Studies
- Flow Assurance
- Fluid Transient Assessment
- Material & System Aging
- Material Degredation
- Material Related Building problems
- Pressure Testing
- Shop Monitoring
- Strain Gauge Techniques
- Thermo-Hydraulics
- Wire Rope Failures
- Disaster Recovery
- Flood
- Air Quality Assessments
- QA/QC
- Security Systems
- Training Programs
- Air Barrier / Water-resistive Barrier
- Chilled Water Cooling
- Drainage (Foundation and Roof)
- Flood Test
- HVAC
- Hydro-electric
- Leak Detection / Moisture Intrusion / Investigation
- MEP Systems/Equipment
- Oceanography Technology
- Registered Professional Engineer in: NY, NJ, CT, TX, and FL
- Certified Construction Manager - CMAA
- ACI - 1
- ACI Special Inspector
- ICC Master of Special Inspection
- ICC Structural Steel and Bolting
- ICC Welding Inspector
- ICC Masonry
- ICC Spray Fireproofing
- ICC Reinforced Concrete
- OSHA – 10 Hour
- NJ Licensed Special Inspector
- NYC Approved Noise Consultant
- New York Water Environmental Association
- Construction Management Association of America
- NYC Housing Authority – On-Call Special Inspections Program
Responsible for the management of a multi-million-dollar special inspection contract. Servicing as Project Director, DnA has inspected hundreds of projects for NYCHA and successfully executed thousands of Permits. Projects include façade rehab, boiler plants, community centers, apartment rehabilitation, and grounds improvements for hundreds of buildings located city-wide for NYCHA Developments. Also responsible for community liaison work actively engaging NYCHA Section 3 requirements. - Hudson Yards, New York, NY
Responsible for providing Special Inspections and Testing Services for core, shell and tenant fit-outs of multiple Towers of the largest private real estate development (18M Sq. ft.) in New York since Rockefeller Center.
